EasyManua.ls Logo

Impax IM800I - Operating Instructions - Storage and Inspection; Regular Inspection and Storage Preparation; Detailed Storage Procedure

Impax IM800I
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
OPERATING INSTRUCTIONS
General Inspection And Storage
Regularly check that all the fixing screws are
tight. They may vibrate loose over time.
Storage
If the generator is not to be used or is to be
stored for more than one month the following
storage procedure should be carried out. Drain
all the fuel from the fuel tank and the
carburettor, ensure that all the fuel has been
removed. Remove the spark plug and pour
approximately one tablespoon full of clean
engine oil into the spark plug hole. With the
ignition turned OFF gently pull on the recoil
starter cord several times. Re-fit the spark plug
and continue to pull the recoil starter cord until
the piston is on the compression stroke (when
resistance is felt) then stop pulling.
Store the generator in a dry well ventilated place
under a cover to prevent any dust or debris from
accumulating on the generator.
14
PLEASE NOTE:
If using for a caravan, motor home
or boat etc refer to the
manufacturers manual regarding
connection of a generator.
Do NOT connect into a house
r ing main circuit.

Related product manuals