November, 2014 IMPCO Technologies Inc. PPI-2 REV. J
3030 South Susan St. Page 7 of 16
Santa Ana, CA 92704
www.impcotechnologies.com
3030 S Susan Street, Santa Ana, CA 92704
Ph: +1 714 656 1200 Fax: +1 714 656 1400
15. Loosen and separate the body (15) from the heat
exchanger (19).
16. Remove the old primary valve seat (18) and
sponge (17). Discard both.
17. Remove the back cover screws (2).
18. Tap the side of the cover (22) firmly with the
handle of the screw driver to break the cover
loose from the gasket (21).
To Next Page
Loading...