Why is my Impecca Air Conditioner not cool enough?
If your Impecca Air Conditioner isn't cooling enough, ensure all windows and doors are closed and try to remove any heat sources from the room. Also, check that the exhaust air duct is properly connected and not blocked. Lower the set temperature and clean the air filter if it's dusty. Place the unit on a flat, level surface.
General| Brand | Impecca |
|---|---|
| Model | IPAC12-KR2 |
| Category | Air Conditioner |
| Language | English |
General safety guidelines for operating the air conditioner correctly and avoiding hazards.
Specifies the recommended room temperature range for optimal cooling and dry modes.
Lists all included parts and their quantities for the air conditioner.
Details the functions of each button and display on the control panel.
Explains error codes and details COOL, DRY, AUTO, and FAN operating modes.
Describes how to set the auto-start and auto-stop timer functions for the unit.
Explains the sleep mode function, which adjusts temperature automatically.
Covers auto-restart feature and air flow direction adjustment.
Guidance on choosing a location and installing the window slider kit.
Step-by-step instructions for installing the unit in double-hung sash windows.
Step-by-step instructions for installing the unit in sliding sash windows.
Instructions for connecting the exhaust hose and using the vent control feature.
Details how to manage water drainage, including continuous drain and full tray alerts.
Instructions for removing, cleaning, and reinstalling the air filters.
Guidance on cleaning the unit's exterior and preparing it for long-term idle periods.
Contact details and resources for assistance with troubleshooting or warranty service.
To Next Page
