Imperial BAS 4 - Establish Bluetooth Connection

E
6. Microphone
- The microphone for hands-free mode is located
here
7. TF card reader
- if the speaker should be used in TF card mode, a
TF card (micro SD, max 32 GB) has to be inserted
here
8. Micro USB port
- port may be used to charge internal battery
(via included USB - micro USB cable) via USB
port (laptop) or external power adapter (e.g.
DC5V/1000mAh phone charger, not included)
- may be used to transfer music les from external
device to TF card (if inserted) via included USB -
micro USB cable
- if speaker is operated in AUX mode, the external
source may be connected here via the included
micro USB - 3.5mm AUX cable
9. Volume control
- turn clockwise to increase volume and vice versa to
decrease volume
Intelligent power saving mode
1. Speaker will automatically switch o if no music is played
or no Bluetooth connection is established in 10 minutes.
2. When the battery is low, a „beep“ sound will be heard
and the volume will turn down automatically. The speaker
continues to play until it switches o due to low battery.
Now, the speaker needs to be recharged to continue
using it.
Establish Bluetooth connection
1. Fully charge the speaker‘s battery.
2. Press button 1 to switch on speaker and short press 1
to switch to Bluetooth mode („Bluetooth mode“ is said).