Do you have a question about the Impex COMPETITOR WM-354 and is the answer not in the manual?
This exercise machine is built for optimum safety. Certain precautions apply whenever you operate exercise equipment.
Plug the two Stabilizer End Caps onto the bottom of the two Rear Upright Beams.
Plug a Stabilizer End Cap onto the bottom of Front Leg. Attach the Front Leg to the Main Seat Support.
Attach one Ø3/4” Washer onto a M10 x 6" Hex Bolt. Insert the Bolt through the Butterfly.
Attach the hole-side of the Backrest Supports onto both ends of the pivot on the Main Seat Support.
Attach the Arm Curl Pad to the Arm Curl Stand. Secure it with two M8 x 5/8” Hex Bolts.
Replacement parts can be ordered by calling Customer Service toll-free at 1-800-999-8899.