Document Version 3.0 © 2021, Impinj, Inc. Document Version 3.0 © 2021, Impinj, Inc.
RESOURCES & NEXT STEPS
Develop business applications using the Impinj Octane SDK, Impinj Octane LLRP toolkit, or
Impinj Octane ETK. For more information, contact Impinj using the resources listed below.
• Sales: www.impinj.com/contact-us
• Support: support.impinj.com
• Developer site: developer.impinj.com
• Postal Address: 400 Fairview Avenue North, Suite 1200, Seattle, WA 98109
NOTICES
Copyright © 2021, Impinj, Inc. All rights reserved.
Impinj gives no representation or warranty, express or implied, for accuracy or reliability of information in this document.
Impinj reserves the right to change its products and services and this information at any time without notice.
EXCEPT AS PROVIDED IN IMPINJ’S TERMS AND CONDITIONS OF SALE (OR AS OTHERWISE AGREED IN A
VALID WRITTEN INDIVIDUAL AGREEMENTWITH IMPINJ), IMPINJ ASSUMES NO LIABILITY
WHATSOEVER AND IMPINJ DISCLAIMS ANY EXPRESS OR IMPLIEDWARRANTY, RELATED TO SALE AND/OR
USE OF IMPINJ PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR
PURPOSE,MERCHANTABILITY,OR INFRINGEMENT.
NO LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, TO ANY PATENT, COPYRIGHT,
MASKWORK RIGHT, OR OTHER INTELLECTUALPROPERTY RIGHT IS GRANTED BY THIS DOCUMENT.
Impinj assumes no liability for applications assistance or customer product design. Customers should provide adequate
design and operating safeguards to minimize risks.
Impinj products are not designed, warranted or authorized for use in any product or application where a malfunction may
reasonably be expected to cause personal injury or death or property or environmental damage (“hazardous uses”) or for
use in automotive environments. Customers must indemnify Impinj against any damages arising out of the use of Impinj
products in any hazardous or automotive uses.
Impinj, Monza, Speedway, xArray, xSpan are trademarks or registered trademarks of Impinj, Inc. All other product or
service names are trademarks of their respective companies. For a complete list of Impinj Trademarks visit:
www.impinj.com/trademarks
The products referenced in this document may be covered by one or more U.S. patents. See www.impinj.com/patents for
details.
OVERVIEW
This guide provides simple steps to quickly start using
your new Speedway
®
reader. For a full description of
connection methods, configuration and system setup
options, please consult the latest Speedway
Installation and Operations Manual.
Box Contents
• 1 x Speedway Revolution Reader
• 1 x Quick Start Guide
Accessories Sold Separately
• Universal Power Supply
• Region-Specific AC Power Cord
• Console Cable
• Speedway Antenna Hub
• Speedway Reader GPIO Box
• Reader Antennas
• Speedway Connect Software
• ItemSense Software
Connections and Ports
• +24 VDC Locking Power Supply (24 V, 2.1 A minimum)
• RJ-45 10/100 BASE-T Ethernet Port
▪ Power over Ethernet (PoE / PoE+) Enabled
• USB Type-B Device
• USB Type-A Host
• Management Console Port
• DB-15 GPIO
• RP TNC antenna
Software for Download
Before getting started, download and install the following on your PC:
• Impinj ItemTest software (available on the Impinj Support Portal – Windows only)
• Latest Octane firmware for Speedway (available on the Impinj Support Portal)
To Next Page
Need help?
General
