To Next PageTo Next Page
Need help?Do you have a question about the impinj SPEEDWAY IPJ-R1000 and is the answer not in the manual?
General| Brand | impinj |
|---|---|
| Model | SPEEDWAY IPJ-R1000 |
| Category | Rfid Systems |
| Language | English |
Details frequency plan and operation for North American UHF RFID.
Explains European operation under EN 302-208 with listen-before-talk (LBT).
Outlines the frequency plan for operation in Taiwan.
Lists required hardware, software, and operating environments.
Describes physical ports, connectors, status indicators, and pin-outs.
Provides guidelines for physically mounting the reader unit.
Instructions for connecting the reader to a power source.
Details on connecting the four RFID antenna ports.
Steps for establishing communication via RS-232 serial port.
Instructions for connecting and verifying network connectivity.
Introduces the Mach1 RFID Command Interface for tag communication.
Introduces commands for network configuration like hostname, IP, and DHCP.
Explains how to navigate the web interface to configure reader settings.
How to start/stop inventory and view tag data.
Explains how filter status is indicated on the operation screen.
User interface for defining tag filtering criteria.
Interface for performing tag read, write, lock, and kill operations.
Displays versions of the reader's primary components.
Differentiates between push and pull upgrade procedures.
Covers CLI and GUI commands for managing firmware images.
Restores the reader to its factory default configuration settings.
Command to restore the reader to its previous valid firmware image.
Explains the logic behind upgrade decisions and partition handling.
Explains navigation, help commands, and basic Rshell usage.
Details the format and meaning of command status and error codes.
Describes commands available at the Rshell root menu like reboot and config.
Comprehensive guide to the 'config' command and its subcommands.
Comprehensive guide to the 'show' command and its subcommands.
Explains the 'transfer' command for offloading log files.
Table of common issues and their recommended resolutions.
Lists the default configuration parameters for username, password, and categories.
Table detailing key sequences and their actions for editing commands.
Details input/output voltage, current, safety, and environmental parameters.
