POWERING YOUR RADIO
Before powering your radio be sure to read
the Safety Instructions on page 11.
The CCRadio -EP will run on four “ D” size NiMH or alkaline batteries or
on 120V AC house current using the included power cord. Batteries are
optional.
AC OPERATION
Before you plug the AC power adapter into the radio, be sure the AC
voltage is 120Volts/60Hz.
Note:
If you have batteries in the radio and you use the AC power cord,
the batteries will automatically be disconnected.
Plug the supplied AC power
adapter into the “ DC IN 6V”
power jack on the left side of
the radio
.
To Next Page
Loading...