─ 33 ─
Console Panel Functions
2.4.2 HR2- HR3
Press PROG. Button cycle through HR2 and HR3 mode, The same HR1.
HR1: Target Heart Rate at 65% MAX HR
HR2: Target Heart Rate at 75% MAX HR
HR3: Target Heart Rate at 85% MAX HR
3. SI switch ENG
3.1 Pull out safety key.
3.2 Press START key three times & hold.
3.3 Reset the safety key after 3 sec.
3.4 Release the START key.
3.5 Using "speed+/-" key adjust SI or ENG (SI-metric, ENG-English).
3.6 Press ENTER or START key to confirm.
4. Elevation auto. adjust mode
4.1 Press & Hold console "Incline+\-" and "Speed+\-" four buttons at the same
time for 3sec. then Through auto. adjust mode.
4.2 Waiting for the finish.
To Next Page
Loading...
Need help?
General
