─ 37 ─
Belt Adjustment and Maintenance
2. Cleaning
Warning! To prevent electrical shock, be sure the power is turn off and
disconnect plug from socket before attempting any cleaning or mainteance.
Routine maintenance and cleaning for your unit will keep good function and
extend the life of your unit. Plesse wipe off the console and other treadmill surfaces
perspiration and dust with a clean, dampened soft cloth after workout.
3. Lubrication
A. Turn off and unplug the treadmill.
B. Lift the belt and insert the silicone about 20 gram to spray smoothly (adjust belt
without slipping after lubrication).
C. Turn the unit on and walk the lubrication in for 3-4 minutes at 1 mph. Walk all
over the belt to ensure smooth lubrication distribution.
To Next Page
Loading...
