Impulse RT700 User Manual

─ 38 ─
Console Panel Functions
2.7.2.1 IF 1 IS SELECTED, LED DISPLAYS "3", "2", "1", BELT STARTS MOVING;
2.7.2.2 IF 2 IS SELECTED, LED DISPLAYS "3", "2", "1", BELT STARTS MOVING;
2.7.2.3 IF 3 IS SELECTED;
(1) LED SCROLLS "CUSTOM DISTANCE: ENTER DISTANCE";
(2) LED DISPLAYS "5KM";
(3) USES SPEED KEYS OR SPEED ADJUSTMENT KEYS: "+" OR "-" TO ADJUST THE
DEFAULT VALUE;
(4) PRESS OK OR QUICK START TO CONFIRM;
(5) LED DISPLAYS "3", "2", "1";
(6) BELT STARTS MOVING.
2.7.3 IF 3 IS SELECTED;
LED SCROLLS "OTHER ADVANCED PROGRAMS: 1= HILL";
2.7.3.1 IF 1 IS SELECTED;
(1) LED DISPLAYS "HILL";
(2) PRESS OK OR QUICK START TO CONFIRM;
(3) LED DISPLAYS "3", "2", "1";
(4) BELT STARTS MOVING.
3. TREADMILL ERROR MESSAGES
3.1 Communication Error message: ER01
3.1.1 Check console and the main communication cable connection;
3.1.2 Check inverter and the main communication cable connection;
3.1.3 Replace inverter;
3.1.4 Replace console.
3.2 Elevation Error messages: ER02
3.2.1 Check power cable of actuator and inverter connection;
3.2.2 Check cable of sensor of actuator and inverter connection;
3.2.3 Replace actuator;
3.2.4 Replace inverter.

Impulse RT700 Specifications

General

Brand	Impulse
Model	RT700
Category	Treadmill
Language	English