10
* IMPORTANT INFORMATION:
BECAUSE OF THE GREAT VARIETY OF PRODUCTS WITH USB,SD AND MMC CARD PORTS
AND THEIR SOMETIMES QUITE MANUFACTURER-SPECIFIC FUNCTIONS WE CAN NEITHER
GUARANTEE THAT ALL DEVICES WILL BE RECOGNIZED NOR THAT ALL OPERATING OPTIONS
THAT ARE POSSIBLE IN THEORY WILL ACTUALLY WORK
HOW TO USE BLUETOOTH IN YOUR CAR AUDIO
HOW TO PERFORM PAIRING
Before you can dial out from the car stereo, you must first perform PAIRING.
Pairing is a procedure used to connect 2 Bluetooth devices together.
1. Press and hold SEL button for 2 seconds.
2. Press SEL button repeatedly until “PAIRING” displays.
3. Press and hold SEL button to engage paring mode. “PAIRING” blinks on
the display.
4. Turn on the Bluetooth feature of your mobile phone. Perform “Add Bluetooth
device” from your mobile phone. The mobile will search for any Bluetooth
devices within the range. Select “CAR BLUETOOTH” and enter Passkey:
“0000” to connect to the car audio. (Please refer to the instruction manual
of your mobile phone for Bluetooth Pairing).
5. The LCD will display “PAIRED” after successful pairing.
Note:
• IfIf “DISCONN” shows instead of “PAIRING”, it means the head unit currently is paired with another
device. Press and hold SEL button to disconnect the connection and perform steps above again.
• “CAR BLUETOOTH” is the Bluetooth device name of the car stereo.
• Refer to your cellular user manual for the proper procedures of pairing Bluetooth devices.Refer to your cellular user manual for the proper procedures of pairing Bluetooth devices.
Audio Streaming
If your phone is “A2DP” format compatible, then you can play music in your mobile and the sound will
be transferred to car head unit.
1. Make sure your mobile and the unit is properly paired and connected.
2. Play the music through your mobile music player software.
3. Press MODE repeatedly until “BT-PLAY” appears in the display. The sound will be transferred to the
head unit.
Making Calls Using the Dial Keypad
You can make calls directly from the supplied Dial Keypad. Before you make calls, make sure that the
devices are properly paired and the keypad cable properly connected to the back of the head unit.
1. Press and hold PHONE on the dial keypad.
2. Enter the phone number via the keypad and press button to dial out. Press button to make
corrections when entering numbers.
3. Press button to end call.
Answering / Hanging Up
To answer a call, press the button on the dial keypad. Speak directly to the keypad’s microphone.
Once you have finished your conversation, press the button to hang up.
Calls (Outgoing, Incoming)
The unit stores all the incoming and outgoing calls. Use this feature to check the numbers and make
calls from it.
“OUT NUM” – outgoing calls made through the dial keypad.
1. Press and hold PHONE on the dial keypad then press and hold SEL button for 2 seconds. “OUT
NUM” displays.
2. Press and hold SEL button again.
3. Rotate volume knob to search for entries and press to call.
“IN NUM” – incoming calls received.
1. Press and hold PHONE on the dial keypad then press and hold SEL button for 2 seconds.
2. Press SEL button repeatedly until “IN NUM” displays.
3. Press and hold SEL button again.
4. Rotate volume knob to search for entries and press to call.
To Next Page
Loading...