To Next PageTo Next Page
Need help?Do you have a question about the In Phase IPS 248BT and is the answer not in the manual?
Provides guidance on choosing a suitable mounting location and adhering to inclination angle limits.
Details the components and steps required to properly support and mount the car audio unit.
Outlines the step-by-step process for folding down and detaching or reattaching the front panel.
Covers power on/off, function selection via SEL, and sound adjustments like BASS, TREBLE, FADER, TA, DSP, and LOUDNESS.
Details settings for ESP mode, CD Multi section, Scroll mode, Beep mode, Stereo/Mono, and Local/DX reception.
Step-by-step guide on how to perform Bluetooth pairing between the car stereo and a mobile phone.
Guides on connecting portable MP3 players via USB and using MMC/SD card slots for music playback.
Covers the Bluetooth pairing process and enabling audio streaming from a connected mobile phone.
Details how to make calls using the dial keypad, answer/hang up, and access call history.
CD/MP3/WMA Player Specifications| signal to noise ratio | > 60 dB |
|---|---|
| channel separation | > 50 dB (1kHz) |
| frequency response | 20Hz - 20 kHz |
FM Tuner Specifications| frequency range | 87.5-108 MHz |
|---|---|
| channel step | 50 kHz |
| intermediate frequency | 150 KHz |
| sensitivity | 2.8 µV |
| stereo separation | 37 dB |
| signal to noise ratio | > 50 dB |
MW/AM Tuner Specifications| frequency range | 522-1620 KHz |
|---|---|
| intermediate frequency | 25 KHz |
| usable sensitivity | 32 dB |
Line-Out Specifications| output voltage | 1.5V (max.) |
|---|---|
| impedance | 10k Ohm |
General Specifications| power supply | 12V DC (10.8-15.6V allowable) |
|---|---|
| speaker impedance | 4 or 8 ohm |
| output power | 60W x 4CH |
| fuse | 10A |
