To Next PageTo Next Page
Need help?Do you have a question about the In-situ Rugged TROLL 100 and is the answer not in the manual?
General| Accuracy | ±0.1% FS |
|---|---|
| Operating Temperature | -20 to 80°C (-4 to 176°F) |
| Power Source | Internal battery |
| Category | Measuring Instruments |
| Material | 316 stainless steel |
| Battery Life | 5 years (typical) |
| Vented Option | Non-vented |
Details what information is covered in the manual, including setup, calibration, and maintenance.
Information about the instrument's serial number location and certification.
Provides In-Situ's mailing address, phone, fax, internet, and support contact details.
Technical specifications for Rugged TROLL 100 and 200 models, including ranges, materials, and output options.
General description of Rugged TROLL 100 and 200 instruments, their capabilities, and housing.
Description of the Rugged Baro TROLL's function for barometric pressure compensation.
Lists communication accessories for Rugged TROLL 100, 200, and Baro TROLL instruments.
Lists available accessories for Rugged TROLL 100 and Rugged Baro TROLL.
Instructions for installing Win-Situ 5 software and the VuSitu mobile app.
Steps to connect a Rugged TROLL instrument to the VuSitu mobile app.
Overview of features available in the VuSitu mobile app menu when connected to an instrument.
How to capture single readings (snapshots) and associate them with a location.
How to start, stop, and save live readings from the instrument.
Methods for sharing downloaded data files via email, cloud storage, or other applications.
Steps to extract and view downloaded data files on a computer using Excel.
Steps to install the 9-volt battery in the Rugged TROLL Com device.
Details on connecting the Rugged TROLL Com to the instrument cable and PC.
Wiring details for connecting the Rugged TROLL 200 cable to an SDI-12 data recorder.
Details log columns and status indicators within the Win-Situ Logging tab.
Explains log control buttons (Start, Pause, Stop) and operations like creating, editing, and downloading logs.
Instructions for calibrating and configuring sensors using the Sensors tab in Win-Situ.
Steps for connecting the instrument to Win-Situ 5 software and synchronizing the clock.
Guide to identifying the correct COM port for USB TROLL Com connections in Windows.
Explanation of Linear and Linear Event logging methods available for instruments.
Details on starting, suspending, resuming, and stopping logs, including pending and manual start types.
Explains Fixed Correction, Manual Entry, and BaroTROLL log file options for barometric compensation.
Steps for applying a single, fixed barometric pressure correction value to log data.
Steps for manually entering barometric pressure correction values into a table.
Details on BaroMerge output files and how to disconnect the instrument from the software.
Procedure for inspecting and replacing O-rings on the instrument to ensure seal integrity.
Guidelines for cleaning the instrument body and connector portions.
Recommendations for storing the instrument to protect it from damage and environmental factors.
Steps for requesting repair service, including RMA process and packaging instructions.
Procedures for cleaning and decontaminating equipment before returning for service.
Form to certify that equipment has been cleaned and decontaminated before return for service.
Declaration of similarity for Rugged TROLL 100, stating compliance with EU directives and standards.
Declaration of similarity for Rugged TROLL 100, stating compliance with UK regulations and standards.
Declaration of conformity for Rugged TROLL 200, stating compliance with EU directives and standards.
Declaration of conformity for Rugged TROLL 200, stating compliance with UK regulations and standards.
Declaration of similarity for Rugged Baro TROLL, stating compliance with EU directives and standards.
Declaration of similarity for Rugged Baro TROLL, stating compliance with UK regulations and standards.
