In-situ Aqua TROLL User Manual

Aqua TROLL Quickstart Guide
Instrument &Accessories
1. Aqua TROLL 100 or 200 instrument
2. Rugged Twist-Lock Cable
3. Wireless TROLLCom or USBTROLLCom
4. Bluetooth-enabled mobile device or Windows PC
Getting Started
1
Connect the instrument to TROLLCom communication device.
Wireless TROLL Com Users USB TROLL Com Users
A. Connect Rugged Cable to
Wireless TROLLCom and
instrument.
B. Instrument is ready to pair with
software. Turn on the Wireless
TROLLCom.
A. Connect Rugged Cable to
TROLLCom and instrument.
B. Plug TROLLCom into PC.
Information subject to change without notice. In-Situ, In-Situ logo, Baro Merge, BaroTROLL, HERMIT, HydroVu™, iSitu, Pocket-Situ, RDO,
RuggedCable, RuggedReader, SmarTROLL™, TROLL, VuSitu, and Win-Situ are trademarks or registered trademarks of In-Situ Inc.
©
. All
rights reserved. This product may be covered by patents identified at www.in-situ.com/patents
0056102 | 2019-04-30

In-situ Aqua TROLL Specifications

General

Brand	In-situ
Model	Aqua TROLL
Category	Measuring Instruments
Language	English

Summary

Getting Started

Connect Wireless TROLL Com

Connect the rugged cable to the Wireless TROLL Com and the instrument, then turn it on for pairing.

Connect USB TROLL Com

Connect the rugged cable to the TROLL Com and instrument, then plug the TROLL Com into a PC.

Connect to Software

Connect to VuSitu Mobile App

Download the VuSitu app, turn on Wireless TROLL Com, select it in the app, and pair via Bluetooth.

Connect to Win-Situ via USB

Open Win-Situ, select 'No' to connect, configure COM settings, click connect, and sync device time if prompted.

Learn More