In Win IW-PE689 User Manual

IW- PE689
Pedestal Entry Server Chassis
(Please read the following steps to assemble)
Please note that the pictures in this installation
guide are for your reference only, and they
may vary from the actual product.
2.Remove the Front Panel
Unlock the locking tabs and remove the front panel.
= Opening the Chassis =
Installation Guide
1. Remove the Side Covers
Unscrew the Thumb screws and remove both side covers.

In Win IW-PE689 Specifications

General

Model	IW-PE689
Type	Chassis
Material	SGCC
Expansion Slots	7
Motherboard Support	ATX, Micro-ATX
Drive Bays	External: 3 x 5.25"
Front Ports	USB 2.0 x 2
Power Supply	PS/2 or Mini Redundant

Summary

Opening the Chassis

Remove the Side Covers

Unscrew the Thumb screws and remove both side covers.

Remove the Front Panel

Unlock the locking tabs and remove the front panel.

Component Installation

Power Supply Installation

Insert the power supply into the chassis with the fan facing down and secure it.

Motherboard Installation

Connect power cables from the power supply to the motherboard.

5.25" Optical Drive Installation

Install the 5.25" optical drive using secure clips and connect cables.

Front I/O Wires Installation

Connect front panel I/O cables like USB, HDD LED, and audio to the motherboard.

3.5" Floppy Drive Installation

Install the 3.5" floppy drive using secure clips and connect cables.

Expansion and Final Installation

Fan Installation

Install rear and optional front fans, connecting their power cords.

Internal 3.5" HDD Installation

Mount a 3.5" HDD onto the bracket and insert it into the chassis.

Add-On (PCI/AGP) Card Installation

Install expansion cards into PCI/AGP slots using tool-free clips.

Panel Installation

Reattach the front and side panels, securing them with thumb screws.