8
OPERATION MANUAL STAR HDMI SWITCH 1<2 4K | 3D
Once the source device is turned off or plugged out, the switcher will automatically select the next power-on
source depending on the sequence automatically (input 3 >i nput 2 > input1)
NOTE:
• When the source devices are on the stand-by mode, its power supply should be turned off, otherwise this
switcher can not meet intelligent function.
FEATURES
• Multifunctional on switching : automatically or mechanical
• IR extender receiver
• IR remote(
• Operation up to 3.4 Gbps per lane (10.2Gbps all channel).
• Support up to 48-bit per pixel Deep ColorTM
• HDCP pass-through.
• Supports uncompressed audio such as LPCM.
• Supports compressed audio such as DTS Digital, Dolby Digital (including DTS-HD and Dolby True HD)
• Support Full 3D and 4k*2k 24hz resolution, bandwidth up to 340MHz.
SPECIFICATIONS
SIGNAL INPUTS/OUTPUT
Input DDC Signal 5 volts p-p (TTL)
Output Video HDMI
OPERATING FREQUENCY
Vertical Frequency Range 24/30/50/60Hz
Video Amplifier Bandwidth 3.4Gbps/340MHz
RESOLUTIONS(HDTV)
Interlaced (50 & 60Hz) 480i,576i,1080i
Progressive( 50 & 60Hz) 480p,576p,720p,1080p,4k*2k
DIEMSIONS
Size (L-W-H) 80×58×18mm
Weight (Net) 55g
To Next Page
Loading...
Need help?
General
