What to do if my Inalto Dryer will not start?
If your Inalto Dryer won't start, there are a few things you can check. First, make sure the plug is firmly in the power socket and that the power outlet is switched on. Check the power outlet by using another portable appliance. Also, check your fuse box to ensure a safety switch hasn’t been tripped. Finally, ensure the dryer door is completely closed.
Why are my clothes still wet after using my Inalto IVD7 Dryer?
If your clothes are still wet after a drying program in your Inalto Dryer, it could be due to several reasons. You may need to select a longer drying time, especially if the room temperature is 12ºC or less. Also, check that the lint filter is not blocked. Review the instructions to ensure you have followed them correctly.
How to fix an E1 error on my Inalto Dryer?
If your Inalto Dryer displays an E1 error, it means the dryer temperature internally is too hot. This may be due to overloading, blocked ventilation, or a blocked lint filter. Switch off the dryer (un-plug), open the door and ensure the load is correct. Ensure that the lint filter is clean and that the dryer can ventilate correctly.
To Next Page
General