6
Bluetooth Receiver Mode (RX)
When BR1006 is in RX mode, you can connect BR1006 with a non-
Bluetooth audio device like a headphone/ speaker/ audio amplifier
via an AUX audio cable. Then connect BR1006 with Bluetooth enabled
devices like smartphones or laptops etc. via Bluetooth. Therefore, non-
Bluetooth audio device like a headphone/ speaker can receive audio
signals via Bluetooth.
LED Indicator
LED Indicator(RX Mode) Status
Blue and red LED ash alternately In pairing mode
Blue LED ashes twice every 3 seconds Automatically Pairing with Previously Paired
Devices
Blue LED ashes 4 times every 10 seconds Successfully paired with aptX HD
Blue LED ashes 3 times every 10 seconds Successfully paired with aptX low latency
Blue LED ashes twice every 10 seconds Successfully paired with aptX
Blue LED ashes once every 10 seconds Successfully paired with SBC
Solid green Pair with two devices at the same time
To Next Page
Loading...
