Inateck BR1008 - Led Indicator

3
2) Turn o󱐯 the BR1008, switch RX (TX) mode to TX (RX) mode after 5
seconds.
After that, the pairing history of TX (RX) mode will be cleared.
6. RX Mode: Pause/Play
Press the Multifunction Button to pause or play while playing music.
7. The product won't automatically power o󱐯 to ensure uninterrupted
user's experience. When not connecting the device to power, please
turn it o󱐯 after use.
8. Press and hold power button rst while connect the device to power
via charging cable to reset the BR1008.
9. The device would automatically select an optimal audio CODEC
supported both under TX and RX modes.The audio CODEC priority of
the BR1008 goes as: aptX Low Latency ＞ aptX HD ＞ aptX ＞ AAC ＞
SBC.
LED Indicator
LED Indicator Status
Blue and red LED ash alternately In pairing mode
Blue LED ashes twice every 3 seconds Automatically Pairing with Previously Paired
Devices
Blue LED ashes 4 times every 10 seconds Successfully paired with aptX HD
Blue LED ashes 3 times every 10 seconds Successfully paired with aptX low latency
Blue LED ashes twice every 10 seconds Successfully paired with aptX
Blue LED ashes once every 10 seconds Successfully paired with SBC or AAC
Solid green Pair with two devices at the same time