6
Bluetooth Receiver Mode (RX)
When BR1008 is in RX mode, you can connect BR1008 with a non-
Bluetooth audio device like a headphone/ speaker/ audio amplifier
via an AUX audio cable. Then connect BR1008 with Bluetooth enabled
devices like smartphones or laptops etc. via Bluetooth. Therefore, non-
Bluetooth audio device like a headphone/ speaker can receive audio
signals via Bluetooth.
Turn on/o aptX Low latency Function
Under pairing mode (LED ashes red and blue alternately), press MFB
button three times to turn on/off aptX Low latency; With aptx Low
latency on, the adapter powers o after the green indicator ashes one
second; With aptX Low latency off, the adapter powers off after the
green indicator ashes twice. Settings remain unchanged after reboot.
c. It is advised to switch o the Bluetooth function of your other devices
to avoid signal interference.
d. We have performed the compatibility testing with various Bluetooth
chipsets on the market. But please note not all these chipsets use
the same software, compatibility issue might still encounter for some
Bluetooth devices. Please contact our customer support team for
help.
e. BR1008 can automatically re-pair to the 2 most recently connected
devices.
To Next Page
Loading...
