2
1. Product Overview
English
Status of Indicator 1 Meaning
Keeps blue Caps Lock Enabled
O Caps Lock Disabled
Status of Indicator 2 Meaning
Blue light ashes Under Bluetooth pairing mode, waiting for pairing, light goes o when paired successfully
Status of Indicator 3 Meaning
Keeps red The keyboard being recharged. (Red light o when fully recharged)
Status of Indicator 4 Meaning
Keeps blue for 3s The keyboard starts.
Blue light ashes Low battery level. (lower than 15%）
2. How to pair an iPad
Step 1: Install iPad onto the Bluetooth keyboard
Step 2: Toggle the power switch to ON, and the Bluetooth keyboard starts.
Step 3: Press the “Connect’’ key on the keyboard to enter Bluetooth pairing mode, when the Indicator 2 will
ash in blue.
Step 4: On the iPad, select Settings- Bluetooth- On.
Step 5: The iPad will display “Inateck KB02012” as an available device.
Step 6: Select “Inateck KB02012” on the iPad.
Step 7: Indicator 2 goes o, which means the keyboard has been paired with iPad successfully.
Note：
To ensure that the iPad sleeps and wakes normally when close/open the keyboard case, please make the edge
of the keyboard in line with the indication line on the support panel.
Pencil Slot
Power Switch
Micro-B Charging Port
Bluetooth Connection
Indicator 3
Indicator 4
Indicator 2
Indicator 1
To Next Page
Loading...