V
4. This product must be installed on a flat and stable floor. If the floor is not level, may
cause harm or incorrect measurement.
5. Make sure you use the AC adapter provided by Biospace. Using other AC adapter may
cause the malfunction of product.
6. Be careful not to spill or drop any residue(food or beverage) on this product. It may
cause serious damage to the electronic components.
7. Do not move during measurement for accurate test result.
8. The arm consists of a hand electrode. Do not force the arm in the wrong direction. The
resulting damage may affect the functioning of the internal cable and circuit board.
9. Be careful not to hurt your fingers on the edge of the foot plate when handling the
screws.
1. Wrong installation contrary to manual guidelines, or other equipment interference, may
cause error or inaccurate test results. To solve the interference problem, you should
-Separate power supply from the equipment that is causing interference.
-Isolate the equipment.
-Use a power supply committed only to device.
-Please contact Biospace if the problem continues.
To Next Page
