19
III
. Storage
(1) Always maintain the BP170(B) in a clean state.
(2) Wipe any stains on the main unit with a smooth and lint-free cloth.
(3) Unfold the one-touch cuff and place it in a storage pouch with the main unit.
The BP170(B) should be transported or stored under the following conditions.
Temperature range -10 ~ 70˚C (14 ~ 158 °F)
Relative humidity 10 ~ 80% RH (No Condensation)
Atmospheric pressure range 50 ~ 106 kPa
• To unfold the cuff, hold the both sides of the cuff and stretch them in the opposite direction
that the cuff winds.
• If the cuff is contaminated and can no longer be used, please replace with a new cuff.
• Please contact Product Support to purchase a replacement cuff.
Note
• Tenir la manchette aux extrémités et les étirer dans le sens contraire de l'enroulement.
• Si le manchon est contaminé, et qu’il ne peut plus être utilisé, veuillez le remplacer par un
nouveau manchon
• Communiquez avec le représentant InBody de votre région pour vous procurer des manchons
additionnels.
Remarque
129x183_BP170_manual_ENG_D_210702.indd 19129x183_BP170_manual_ENG_D_210702.indd 19 2021-07-01 오후 5:56:012021-07-01 오후 5:56:01
To Next Page
Loading...
Need help?
General
