Indel B TB45A User Manual

17
USING THE REFRIGERATOR AT HOME
- This model can be fed equally using 12/24V or mains power (100V - 240V AC).
- It is equipped with 2 sockets to connect the two different cables for DC respectively AC.
- The refrigerator is provided with automatic switch over from one kind of feeding to the other.
- Should both be present at the same time, the device will always set itself on mains power
priority feeding by 100V~240V AC.
ELECTRONIC CONTROL
Compressor station
Functions and features.
This is an electronic device which has the function of piloting the motor of the compressor and
carrying out all the controls and electrical protection of the system.
Its main features are as follows:
a) Protection of the battery through automatic turning off of the compressor when the feeding
voltage reaches the minimum threshold.
The compressor will start up again automatically when the voltage goes back to normal values.
Note: these values have been measured at control unit input and/or on the DC socket.
BATTERY
PROTECTION
SWITCH
POSITION
CUTOUT
12V
CUTIN
12V
CUTOUT
24V
CUTIN
24V
LOW 9.6 10.9 21.3 22.7
MED 10.1 11.4 22.3 23.7
HIGH 11.1 12.4 24.3 25.7
ENGLISH
TB45A-TB55A TB31A-TB41A-TB51A

Indel B TB45A Specifications

General

Brand	Indel B
Model	TB45A
Category	Cooling boxes
Language	English