Need help?Do you have a question about the Indel B TB65 DD Steel and is the answer not in the manual?
General| Category | Refrigerator |
|---|---|
| Capacity | 65 Liters |
| Material | Steel |
| Energy Class | A+ |
| Number of Doors | 1 |
| Installation Type | Freestanding |
| Refrigerant | R134a |
| Power Supply | 12/24V DC |
| Color | Steel |
| Noise Level | 42 dB |
| Temperature Range | +10°C to -18°C |
Introduction to the TB65 DD Steel model with visual representation.
Introduction to the TB92 DD Steel model with visual representation.
Introduction to the TB118 DD Steel model with visual representation.
Details on gross capacity and external dimensions for each model.
Information on weight and installed power requirements.
Supported voltage inputs and refrigerant gas details.
Keep ventilation openings clear to ensure proper operation.
Avoid mechanical defrosting and damaging the refrigerant circuit.
Use recommended appliances internally; do not store explosive substances.
Be aware of risks of fire and electrical shock.
Avoid hot items touching plastic; do not store flammable gas/liquids.
Do not touch hot compressor; use correct electrical components and cables.
Handle refrigerant circuit carefully; use travel box for specific items only.
Identification of lid latches and carry handles.
Location of the control panel and power input panel.
Details on DC and AC power cables.
Position appliance securely, limit heat exposure, and ensure adequate airflow.
Appliance operates on AC (100-240V) and DC (12V/24V) inputs.
Guidance on selecting the correct automotive electrical cable size for DC input.
Protects vehicle battery from excessive discharge when connected to 12/24V.
Details on LOW, MID, and HIGH protection levels for 12V and 24V.
How to connect the appliance using a 12/24V DC source.
How to connect the appliance using a 100-240V AC mains source.
Steps to turn the appliance on after connecting power.
How to adjust and set cabinet temperatures for cooling.
Understanding cabinet temperature displays and switching between °C and °F.
Independent zone temperature control with specific setting rules.
How to use the unit in single zone mode and turn off the Left Zone.
Adjust compressor speed for economy or fast cooling.
Tips for optimizing appliance efficiency and reducing power consumption.
Guidelines for connecting solar panels via a battery for power.
Instructions for using generators, emphasizing battery connection for DC output.
Advice on storing liquids at 0°C and positioning food items.
Tips for improving efficiency and minimizing heat ingress through door openings.
Precautions for installation in vehicles regarding sunlight and ventilation.
Crucial safety step: disconnect power before any maintenance.
Instructions for cleaning the appliance interior and exterior.
Check power, connections, ventilation, and fuses before contacting technical assistance.
Explanation of fault codes (E1-E5, LL, HH) displayed by the unit.
Marked according to EU WEEE directive; requires professional waste treatment.
To Next Page
