inDESIGN MP30D - Specifications

MP30D: INSTALLATION & OPERATION MANUAL
PAGE 11
SPECIFICATIONS
MP30D SPECIFICATION
Output power 30 watts. 8Ω or constant voltage 100v/70v line
AC power supply Internal universal power supply (110VAC - 240VAC)
Output low impedance 8 ohm
Hi impedance output 70V / 161 ohm
100V / 333 ohm
Input sensitivity Microphone 5mV
Line 500mV
Frequency response 90Hz – 16KHz, +/- 1dB
THD (at -3dB rate power) -0.5% @ 1KHz
Tone control Bass 100Hz + - 10dB, Treble 10kHz + - 10dB
Protection Thermal protected (at 75 degrees), short circuit overload
Size mm. 220 x 66 x 200
Weight kg (Net) 2.8
FM radio 88 – 108MHz. 10 preset stations
DAB+ frequency range 168MHz – 240MHz
Bluetooth V3.0, V4.0 supported
USB playback MP3 & WMA supported
Line Output level 600mV
Mains power Internal universal power supply (110VAC - 240VAC)
Power consumption 60 watts
Safety RCM / CE / EMC
Channel separation >50dB
Noise level <75dB
DC power supply 21-25V
AC fuse T1AH 250V 5 x 20 mm
* Disclaimer: Instructionsandspecicationsarecorrectattimeofprinting.
  Informationwithinmaybesubjecttochangewithoutnotice.