Need help?Do you have a question about the Indesit ? 236 G and is the answer not in the manual?
Proper airflow for compressor and condenser is essential for efficient operation.
Avoid direct sunlight, ovens, or cook tops to maintain optimal temperature.
Ensure the floor is level for proper appliance function and stability.
Check electrical connection and socket earthing conforms to regulations.
Ensure the electrical socket supports the appliance's maximum power load.
Wait at least 3 hours after setting the appliance upright before plugging in.
Place away from heat sources in a well-ventilated room.
Use medium thermostat settings for optimum performance and energy saving.
Ensure good air circulation by not overfilling the appliance.
Open doors only when necessary to retain cold air and save energy.
Keep door gaskets clean and soft to ensure a proper seal.
Cool hot food to room temperature before storing to maintain efficiency.
Defrost the freezer when frost becomes too thick.
Warning about the refrigeration circuit and avoiding mechanical tools for defrosting.
Cleaning procedures using water/bicarbonate and items to avoid.
Check power supply, plug insertion, and outlet adequacy.
Verify door seals, thermostat setting, and if the appliance is overfilled.
Check thermostat setting and ensure food isn't touching the cold back wall.
Check door closure, ambient temperature, and thermostat setting.
Ensure correct installation between cabinets and appliance levelling.
Inspect the drain hole for blockages.
Proper airflow for compressor and condenser is essential for efficient operation.
Avoid direct sunlight, ovens, or cook tops to maintain optimal temperature.
Ensure the floor is level for proper appliance function and stability.
Check electrical connection and socket earthing conforms to regulations.
Ensure the electrical socket supports the appliance's maximum power load.
Wait at least 3 hours after setting the appliance upright before plugging in.
Place away from heat sources in a well-ventilated room.
Use medium thermostat settings for optimum performance and energy saving.
Ensure good air circulation by not overfilling the appliance.
Open doors only when necessary to retain cold air and save energy.
Keep door gaskets clean and soft to ensure a proper seal.
Cool hot food to room temperature before storing to maintain efficiency.
Defrost the freezer when frost becomes too thick.
Warning about the refrigeration circuit and avoiding mechanical tools for defrosting.
Cleaning procedures using water/bicarbonate and items to avoid.
Check power supply, plug insertion, and outlet adequacy.
Verify door seals, thermostat setting, and if the appliance is overfilled.
Check thermostat setting and ensure food isn't touching the cold back wall.
Check door closure, ambient temperature, and thermostat setting.
Ensure correct installation between cabinets and appliance levelling.
Inspect the drain hole for blockages.
General| Installation | Freestanding |
|---|---|
| Number of Doors | 2 |
| Defrost System | Manual |
| Noise Level | 39 dB |
| Color | White |
To Next Page
