11GB
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
Worktop illumination
Worktop illumination is provided by 2
40W bulbs.
To replace the lighting elements
proceed as follows:
• Remove the metal clips T.
• The glass diffuser is kept in position by
the retaining lugs Z.
• Pull the glass diffuser slightly to one
side until it disconnects from the lug on
the other side (arrow 1), then pull
slightly downwards (arrow 2) and slide
in the opposite direction (arrow 3) until
the glass diffuser can be removed.
• Replace the lamps or the neon strip
and replace the glass diffuser by
repeating the above operations in
reverse order (fig. 10).
Cleaning
When cleaning the hood:
• Never use a wet cloth or sponge, or
running water.
• Never use thinners or products
containing alcohol, as they might
damage the paintwork.
• Never use abrasive cleaning materials,
in particular when cleaning stainless
steel surfaces.
It is recommended to use a damp
cloth and mild liquid household
cleaner.
Fig. 10
Get other manuals https://www.bkmanuals.com
To Next Page
Loading...
