Indesit EDPE 945 A2 User Manual

Contents
Installation, 2
Warnings, 4
Care and maintenance, 6
Description of the tumble dryer, 8
How to carry out a drying cycle, 9
Programmes and options, 10
Laundry, 13
Troubleshooting, 15
Service, 16l
EDPE 945 A2
Instruction manual
TUMBLE DRYER
This symbol reminds you to read this
instruction manual.
! Keep this manual at hand for immediate reference whenever
necessary. Always store this manual close to the tumble dryer and
remember to pass it on to any new owners when selling or tran-
sferring the appliance, so they may familiarise with the warnings
and suggestions herein contained.
! Read these instructions carefully: the following pages contain
important information on installation and useful suggestions for
operating the appliance.
www.indesit.com
English,1
GB
Français,17
FR

Indesit EDPE 945 A2 Specifications

General

Type	Condenser dryer
Appliance placement	Freestanding
Rated capacity	9 kg
Drying class	B
Anti-Crease function	Yes
Noise level	67 dB
Energy efficiency class	B
Width	60 cm
Depth	60 cm
Height	85 cm
Product Type	Tumble dryer
Drying Technology	Heat Pump
Delay Start	Yes
Child Lock	Yes
Color	White
Loading type	Front loading
Drying system	Condensation

Summary

Installation

Where to put your dryer

Ventilation

Electrical connections

Checks required before plugging in the appliance, including earthing and voltage compatibility.

Warnings

General safety

Essential safety precautions for operating the appliance, including user supervision and handling.

To minimise the risk of fire in your tumble dryer

Guidelines to prevent fire hazards, such as drying only washed items and avoiding specific materials.

Care and maintenance

Cleaning the filter after each cycle

Instructions for cleaning the lint filter to maintain dryer performance and prevent damage.

Emptying the water container after each cycle

Procedure for emptying the water container to prevent operational interruptions or errors.

Cleaning the Heat Pump Filter Unit

Instructions for periodically cleaning the heat pump filter unit to optimize dryer performance.

How to carry out a drying cycle

Starting and selecting a programme

Step-by-step guide on how to plug in, load, select a programme, and start the drying cycle.

Programmes and options

Programme chart

Special/Sport/Partial Programmes

Troubleshooting

The dryer does not start.

Common reasons why the dryer fails to start and troubleshooting steps.

The drying cycle does not start.

Potential causes for the drying cycle not initiating and solutions.

Drying times are too long.

The programme is finished but the items are damper than expected.

The code 'F' appears on the display followed by one or two numbers...

Interpreting error codes displayed on the dryer and initial troubleshooting steps.