To Next PageTo Next Page
Need help?Do you have a question about the Indesit EWDC 6105 and is the answer not in the manual?
General| Type | Washer/Dryer |
|---|---|
| Washing Capacity | 6 kg |
| Drying Capacity | 5 kg |
| Maximum Spin Speed | 1000 RPM |
| Wash Efficiency Class | A |
| Spin Efficiency Class | B |
| Width | 60 cm |
| Height | 85 cm |
| Programs | 16 |
| Color | White |
Procedure for removing packaging and ensuring the appliance is correctly positioned.
Instructions for safely connecting the appliance to water and power sources.
Guidance on properly connecting the appliance's drain hose.
Checks required before plugging the appliance into an electrical socket.
Steps to perform before the first use of the washing machine.
Specifications and technical details of the washer-dryer.
Procedure to safely disconnect water and electricity before maintenance.
How to clean the exterior and rubber parts of the appliance.
Instructions for removing and cleaning the detergent dispenser.
Advice on keeping the door and drum clean to prevent odors.
Information on cleaning the pump pre-chamber.
Recommendation to check the water inlet hose for damage annually.
Important safety instructions for the domestic use of the washer-dryer.
Guidance on the proper disposal of packaging and old appliances.
Overview and explanation of the washer-dryer's control panel.
Explanation of the various indicator lights and their meanings.
Step-by-step guide on how to start a wash cycle.
Detailed table listing all available wash cycles and their parameters.
Description of quick wash programs for daily use.
How to adjust the wash temperature for different cycles.
Options for setting the drying level and time.
Explanation of additional functions and how to activate them.
Information on the correct use and placement of detergents.
Guidance on sorting and preparing laundry before washing.
Specific advice for washing and drying special garments.
Explanation of how the load balancing system works.
The appliance does not power on or make contact.
The washing program fails to initiate.
Indicator light for the first phase flashes rapidly, no water intake.
The machine repeatedly fills and empties water.
The appliance fails to empty water or spin the drum.
The machine shakes intensely during the spin phase.
Water is observed escaping from the appliance.
Specific indicator lights flash, preventing door opening.
The machine produces too much foam during operation.
The drying function is not working correctly.
Steps to take before contacting technical support for issues.
Details needed when contacting customer support for service.
