EasyManua.ls Logo

Indesit LI9 S2E W - User Manual

Indesit LI9 S2E W
36 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
EN
Quick guide
* Available only on certain models
THANK YOU FOR BUYING AN INDESIT PRODUCT
In order to receive a more complete assistance, please
register your product on www . indesit . com/ register
Before using the appliance carefully read the Safety
Instruction.
FIRST TIME USE
After installation, wait at least two hours before connecting the
appliance to the power supply. Once connected, it will start working
automatically. The ideal temperature settings are preset from the
factory.
After turning the appliance on, wait 4-6 hours for it to reach the correct
food storage temperature.
CONTROL PANEL
1. Indicator Leds (to display the current temperature set point or the
Super Cooling function)
2. Super Cooling Button / Temperature Button
TEMPERATURE SETTING
Press the Temperature button on the control panel to adjust the
temperature from the warmest through the lower to the coldest
level. Pressing the Temperature button, the temperature setting will
change cyclically. At rst plug-in of appliance temperature setpoint is
present at medium position (factory setting). Following table shows
temperature setpoints:
OFF ON
High temp.
Med-high temp.
Medium temp.
Med-low temp.
Low temp.
Super cooling
Recommended setting:
• Refrigerator compartment: +4°C or MED
• Freezer compartment: -18°C or -20°C
Note: Displayed set points correspond to the average temperature
throughout the whole refrigerator.
SUPER COOLING
The use of the Super Cooling function is recommended to increase the
cooling capacity of the refrigerator compartment when placing a very
high quantity of food within it.
To activate the Super Cooling function, press and hold for 3 seconds
the Temperature button on the control panel till all the 3 LEDs will turn
on.
The function is automatically deactivated after 24 hours and return to
previous selected set point.
The function can be manually deactivated by pressing and holding for
3 seconds the Temperature button on the control panel.
Note: Super Cooling function should be also switched ON before placing
fresh food to be frozen in the freezer compartment, in order to maximize
the freezing capacity.
LED LIGHT
This product contains a light source of energy eciency class G.
If the LED light system does not work, please contact the Service to
replace it.
Important: The refrigerator compartment light switches on when
the refrigerator door is opened. If the door is kept open for more than
8 minutes the light will be automatically switched o.

Table of Contents

Questions and Answers

  • T
    Todd MillsAug 9, 2025
    What to do if the Indesit LI9 S2E W temperature is too high?
    • L
      Lynn SavageAug 9, 2025
      Several issues can cause the appliance temperature to be too high. First, make sure that the condenser (at the back of the appliance) is free of dust. Ensure the door is properly closed and that the door seals are correctly fitted. On hot days or if the room is warm, the motor will naturally run longer. If the door has been left open or large amounts of food have been stored, the motor will run longer to cool the interior.
  • R
    Robin JonesAug 13, 2025
    How to fix the light that does not work in Indesit LI9 S2E W?
    • C
      connie70Aug 14, 2025
      If the light in your Indesit Refrigerator isn't working, it may need replacing, or the appliance may be in On/Standby mode. Ensure the protection devices and fuses in your home's electrical system are working. Check that the power cable is plugged into a live socket with the correct voltage. If the LEDs are broken, contact the Service for an exchange.
  • S
    Susan JamesAug 19, 2025
    Why is there water in the defrost pan of my Indesit LI9 S2E W Refrigerator?
    • J
      Jerry SloanAug 19, 2025
      The presence of water in the defrost pan is normal in hot, damp weather. To prevent overflow, make sure the Indesit Refrigerator is level.
  • P
    Pam RodriguezAug 25, 2025
    How to fix Indesit LI9 S2E W Refrigerator doors that don't open and close properly?
    • T
      Tara WhiteAug 25, 2025
      Several issues may prevent the doors from opening and closing correctly. Check that food packages are not blocking the door. Ensure that the internal parts or the automatic ice maker are not out of position. Check that the door seals are not dirty or sticky. Also, ensure the appliance is level.
  • K
    krubioAug 29, 2025
    What to do if my Indesit LI9 S2E W is not working?
    • P
      patrickdawsonAug 29, 2025
      If the Indesit Refrigerator is not working, there may be a power supply problem. Check if the power cable is plugged into a live socket with the correct voltage. Also, check the protection devices and fuses of the electrical system in your home.
  • H
    harry69Sep 2, 2025
    Why does the motor seem to run too much on my Indesit LI9 S2E W?
    • J
      Jessica ThompsonSep 3, 2025
      Several factors can cause the motor to run longer than expected. Ensure the appliance controls are correctly set. Avoid adding a large amount of food at once. Also, avoid opening the door too often and ensure that it closes properly. Motor running time depends on the number of door openings, the amount of food stored, the room temperature, and the temperature control settings.

Indesit LI9 S2E W Specifications

General IconGeneral
Appliance placementFreestanding
Product colourWhite
Built-in displayNo
Hinge typeRight
Reversible doorsYes
Number of compressors1
Climate classSN, N, ST, T
Noise level39 dB
Fridge interior lightYes
Lamp typeLED
Number of shelves/baskets in fridge4
Number of vegetable drawers1
Door balconiesYes
Egg balconyYes
Bottle rackYes
Number of shelves/baskets in freezer3
Ice cube trayYes
Annual energy consumption250 kWh
Number of Shelves4
Number of Door Bins3
Fridge net capacity223 liters
Star rating4
Refrigerator Net Capacity223 liters

Related product manuals