EasyManua.ls Logo

Indesit UI8F1CW - Appliance Functions; Smart Display Function; On;Stand By Function; Black Out Alarm

Indesit UI8F1CW
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
185


Thisfunctioncanbeusedtosaveenergy.Pleasefollow
the instructions contained in the Quick Start Guide to
activate/deactivatethefunction.Twosecondsafter
activationoftheSmartDisplay,thedisplaygoesoff.
Toadjustthetemperatureoruseotherfunctions,it
is necessary to activate the display by pressing any
button.Afterabout15secondswithoutperformingany
action,thedisplaygoesoffagain.Whenfunctionis
deactivated the normal display is restored. The Smart
Displayisautomaticallydisabledafterapowerfailure.
Rememberthatthisfunctiondoesnotdisconnectthe
appliancefromthepowersupply,butonlyreducethe
energy consumed by external display.
The declared appliance energy consumption
referstooperationwiththeSmartDisplayfunction
activated. This function is available only on the model
withUserInterfaceonthedoor.

ThisfunctionturnsOn/Stand-bythefreezer
compartments.ToputtheproductinStand-by,press&
holdtheOn/Stand-bybutton
for3seconds.When
theapplianceisinStand-by,thelightinsidethefreezer
compartmentdoesnotwork.Rememberthatthis
operation does not disconnect the appliance from the
powersupply.ToswitchtheapplianceOnagain,simply
presstheOn/Stand-Bybutton
.

Afterapowerblackout,yourproductisdesignedto
automatically monitor the temperature in the freezer
whenelectricityisresupplied.Ifthetemperaturein
thefreezerrisesabovefreezinglevel,theBlackOut
indicator
turnson,theAlarmindicator
blinks
andtheacousticalalarmsoundswhenelectricityis
resupplied.
To reset the alarm press the Stop Alarm button
just
once.
IncaseofBlackOutAlarm,thefollowingactionsare
recommended:
• Ifthefoodinthefreezerisunfrozenbutstillcold,all
thefoodinthefreezershouldbeeatenwithinthe
next24hours.
• Ifthefoodinthefreezerisfrozen,thisindicatesthe
foodwasthawedandthenrefrozenwhenelectricity
wasre-suppliedwhichdegradestaste,quality
and nutritional value and also could be unsafe. It
is recommended to not consume the food but to
dispose of the entire content of the freezer. The
BlackOutAlarmisdesignedtoprovideguidanceon
food quality in the freezer in the event of electricity
black out. This system does not guarantee food
quality or safety and consumers are advised to use
theirownjudgmentinevaluatingfoodqualityin
freezer compartment.

The acoustic alarm sounds and temperature indicator
(°C)blinks.Thealarmisactivatedwhen:
• Theapplianceisconnectedtothepowersupply
after prolonged disuse
The freezer compartment temperature is too high
The quantity of fresh foods loaded into the freezer
exceeds that indicated on the rating plate
The freezer door has been left open for a long time.
To mute the alarm buzzer press Stop Alarm button
just once. The Alarm indicator
is automatically
turned-offassoonasthefreezercompartmentreaches
atemperaturebelow-10°Candthetemperatureset
indicator(°C)stopblinkingandshowsthechosen
setting.

The Alarm icon
lights up blinking and the acoustic
alarmsounds.Thealarmisactivatedwhenthedoor
is left open for more than 2 minutes. To disengage the
dooralarmclosethedoor,orpressonceStopAlarm
button
to mute the acoustic alarm.
*Availableonselectedmodelsonly.PleasecheckontheQUICKSTARTGUIDEifthisfunctionisactuallyavailableonyourmodel.

Table of Contents

Related product manuals