Indesit WD12X User Manual

Operating Instructions – Washer Dryer Indesit WD12X
Control Panel
A. Programme selector knob
Use this knob to select the wash programme.
Turn this knob clockwise only. To select a programme, you should turn the knob so that the symbol/number of the
desired programme is in line with the pointer on the knob.
Now press on/off button H (position I), pilot lamp I will start flashing.
After 5", the setting will be accepted, pilot lamp I will stop flashing (staying lit) and the wash cycle will begin.
Should you wish to interrupt the programme in progress or set a new one, select one of the symbols (Stop/Reset)
and wait 5": when the cancellation has been accepted, pilot lamp I flashes, and you can then turn the appliance off.
After the wash cycle has been set and accepted by the washer-dryer, turning the knob will have no effect (except for
when it is on position Stop/Reset).
B. Temperature control knob
It is used to set the wash temperature. It also allows you to reduce the temperature recommended for the selected
programme, and even to set a cold wash cycle ( ).
C. Drying cycle knob
Use this knob to select the desired drying cycle. Two options are available:
A - Based on time: From 40 minutes to 150.
B - Based on the damp level of the dry clothes:
Iron: slightly damp clothes, easy to iron.
Wardrobe: dry clothes to put away.

Indesit WD12X Specifications

General

Brand	Indesit
Model	WD12X
Category	Washer/Dryer
Language	English

Summary

Control Panel Overview

Programme Selector Knob

Use this knob to select the wash programme by turning clockwise to align with the pointer.

Temperature Control Knob

Sets the wash temperature, allowing reduction or cold wash selection.

Drying Cycle Knob

Selects the desired drying cycle based on time or dampness level (Iron, Wardrobe, Extra Dry).

Detergent Dispenser

Compartments for pre-wash, main wash, fabric conditioner, and optional bleach.

Easy Iron Function

Reduces creases for easier ironing, usable with specific wash programmes.

Slow Spin Function

Reduces spinning speed for cotton/linen and synthetic fabric programmes.

Stain Removal Function

Provides a more intensive wash for better stain removal with liquid additives.

ON-OFF Button

Switches the appliance on or off; does not cancel the selected programme.

Indicator Lamps

Explains the ON-OFF lamp for status and door lock, and the drying cycle lamp.

Selecting and Starting Programmes

Wash Only Cycle

Instructions on selecting a programme for wash-only operation.

Combined Washing and Drying

Instructions for automatic washing and drying cycles, including load limits.

Dry Only Cycle

Procedures for drying laundry without washing, including load limits and pre-conditions.