EasyManua.ls Logo

IndigoVision 8000 - Wiring Requirements; Lens Requirements

IndigoVision 8000
48 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
8
Wiring Requirements
Lens Requirements
The camera is supplied with a CS mount varifocal lens.
Other CS mount lenses can be used. The camera supports DC
direct drive auto-iris lenses via a standard 4-pin EIAJ connector
on the camera back panel.
Table 2 IO connector wiring requirements
Pin Signal
Recommended
Wire Gauge
Pin 1 AUX PWR 18 AWG
Pin 2 AUX PWR 18 AWG
Pin 3 NOT USED N/A
Pin 4 OUT1A 22 AWG
Pin 5 IN1+ 22 AWG
Pin 6 OUT1B 22 AWG
Pin 7 IN2+ 22 AWG
Pin 8 IN1- 22 AWG
Pin 9 GND 22 AWG
Pin 10 IN2- 22 AWG
Pin 11 CONSOLE RX 22 AWG
Pin 12 CONSOLE TX 22 AWG
Pin 13 GND
Pin 14 VIDEO_OUT 75 ohm coax
Pin 15 AUDIO_OUT
Pin 16 AUDIO_LINE_IN
Pin 17 GND
Pin 18 AUDIO_MIC_IN