Need help?Do you have a question about the Indmar OM0502-04 and is the answer not in the manual?
Definitions of DANGER, WARNING, CAUTION, and NOTICE safety symbols.
How to find and record your engine's serial number.
Recommended fuels and lubricants for optimal engine operation.
Owner's rights and responsibilities under the emission warranty.
Details on what emission control parts are covered and for how long.
Pre-start checks and initial engine startup procedures for new engines.
Guidelines and steps for proper engine break-in to ensure longevity.
Key safety precautions and operational guidelines for boat use.
Essential checks before starting the engine each day for safe operation.
Step-by-step guide for safely starting the engine.
Steps for restarting a warm engine or clearing a flooded engine.
Regular checks for bilge, gauges, and basic engine status during operation.
How to use shift/throttle controls and safety features like neutral start.
Proper engine cooling methods and related warnings.
Guidance on choosing the right propeller for optimal engine performance.
Recommended gasoline types, octane ratings, and refueling precautions.
Inspecting fuel lines, using stabilizers, and handling alcohol-blended fuels.
A schedule of required maintenance tasks and their recommended intervals.
Procedures for checking, adding, and changing engine oil and filter.
Details on open/closed cooling systems and coolant level checks.
Procedures for checking and maintaining transmission fluid levels and types.
Steps to prepare the engine for storage and prevent damage.
Procedures for draining raw water and fresh water cooling systems for winter.
Steps to recommission the engine after a period of inactivity.
Common causes and solutions for engines that are hard to start cold.
Diagnosing and resolving issues with fuel economy and high-speed operation.
Troubleshooting engine crank issues and rough idling.
Details on parts and workmanship covered under the warranty terms.
Exclusions from warranty coverage, including misuse and normal wear.
How to transfer the warranty and the process for making claims.
General| Type | V8 |
|---|---|
| Compression Ratio | 9.4:1 |
| Horsepower | 350 HP |
| Displacement | 5.7L (350 cu in) |
| Bore | 4.00 in (101.6 mm) |
| Stroke | 3.48 in (88.39 mm) |
| Fuel System | Multi-Port Fuel Injection |
| Cooling System | Closed Loop Cooling System |
To Next Page
