Indoor Cycling TOMAHAWK IC7 - User Manual

01.05.2014 (release date and version)
_________________________________________________________________________________
FB TS AS7 01 ICG® Standard Operating Procedure | released by ICG® Service Department 1
TASK DESCRIPTION:
· Unpacking & assembling TOMAHAWK IC5 & IC7 / MATRIX IC5 & IC7 Indoor Cycle
· IC7 console commissioning process
Applicable for Product:
-IC5 & IC7 Tomahawk powered by ICG
-IC5 & IC7 Matrix powered by ICG
Applicable for Product Version:
-IC5 & IC7 two-stage drivetrain
Applicable for Product Art. No.:
For both SKU´s THK IC5 & IC7 powered by
ICG and Matrix IC5 & IC7 powered by ICG
- THK: IC-TKIC5B-01
- MX: IC-MXIC5B-01
- THK: IC-TKIC7B-01
- MX: IC-MXIC7B-01
Applicable for Product Serial No.:
- THK IC5: TAQB0000001-14D > ……
- MX IC5: LAQB0000001-14E > ……
- THK IC7: TARB0000001-14B > ……
- MX IC7: LARB0000001-14B > ……
The product article number and product serial number information can be found on the tag plate label positioned on the lateral frame
tube as shown below. Please make sure to identify the product prior to performing any repair work.

Summary

Assembly and Commissioning Process

Before Assembly

Prepare for assembly by ensuring the bike is stable and unpacking components carefully.

Rear Stabilizer Assembly

Secure handlebar and seat post sliders, then mount the rear stabilizer with specified torque.

Front Stabilizer Assembly

Carefully tilt the bike and mount the front stabilizer using the 17mm socket wrench.

Saddle Position Check

Ensure the saddle is level and securely tightened, positioning rails to the specified mark.

Handlebar Assembly

Mount the handlebar weldment using the provided bolt and socket wrench, applying specified torque.

IC7 Console Assembly

Slide the IC7 console into its bracket and secure with a bolt using the 3mm Allen key.

Pedal Assembly

Mount the 'R' pedal clockwise and the 'L' pedal counter-clockwise to the crank arms.

Assembly Completion Check

Simulate a brief session to ensure the bike is functioning correctly after assembly.

IC7 Console Commissioning

Power up the IC7 console by turning the crank and access settings via console buttons.

Settings and Configuration

General Settings Configuration

Configure general settings like language, weight unit, distance unit, and front LED.

Calibration Procedures

Brake Calibration Process

Calibrate the brake system by following the on-screen steps for resistance dial adjustments.

Offset Calibration

Perform offset calibration by following on-screen prompts for pedaling and resistance adjustments.

Operation and Finalization

End of Operation and Training Session

Exit the calibration menus and refer to the console manual for training session programming.

Indoor Cycling TOMAHAWK IC7 Specifications

General

Type	Indoor Cycling Bike
Brand	TOMAHAWK
Model	IC7
Resistance System	Magnetic
Drive System	Poly-V Belt
Flywheel Weight	18 kg
Adjustable Seat	Yes
Adjustable Handlebars	Yes
Max User Weight	150 kg
Display	LCD
Inseam Height Adjustment	Yes
Dimensions	132 x 52 x 120 cm
Q-Factor	155 mm
Connectivity	Bluetooth
Pedals	Dual-sided pedals with SPD and toe clip