Need help?Do you have a question about the Industrial Scientific Ventis MX4 and is the answer not in the manual?
General| Operating Temperature | -4°F to 122°F (-20°C to 50°C) |
|---|---|
| Ingress Protection | IP66/67 |
| Sensors | O2, CO, H2S |
| Display | LCD |
| Certifications | UL, ATEX, IECEx |
| Gases Detected | Oxygen (O2), combustible gases (LEL), hydrogen sulfide (H2S), carbon monoxide (CO) |
| Pump | Optional |
| Humidity Range | 15% to 95% non-condensing |
| Alarm | Visual, audible, and vibrating alarms |
| Battery | Rechargeable lithium-ion battery |
| Gas Detection | Combustible gases, oxygen, carbon monoxide, hydrogen sulfide |
| Connectivity | USB |
| Durability | Rugged design |
| Battery Life | 12 hours (rechargeable battery), 8 hours (alkaline battery) |
Covers personnel, hazardous conditions, poisons, and general usage guidelines.
Details on specific agency requirements and warnings for monitor use.
Best practices for monitor operation, maintenance, and safety.
Guide to unboxing the monitor and identifying included components.
Details on the monitor's physical components, user interface, and layout.
Procedures for maintaining instrument functionality and operator safety.
List and details of accessories and replacement parts for the monitor.
Technical specifications for display, case, alarms, size, and weight.
Details on battery run time, charge time, and operating conditions.
Technical data on sensor measuring ranges, accuracy, and response times.
Factors for determining LEL based on different calibration gases.
Details on hazardous-area certifications and compliance standards.
Specific marking requirements for ATEX and IECEx certifications.
Legal disclaimer and limitations on manufacturer's warranty.
To Next Page
