What to do if infaco Electrocoup F3015 pruning shears do not start with sufficient conductivity?
If your Infaco Power Tool pruning shears do not start despite sufficient conductivity, repeat the calibration steps. Ensure you release the trigger before breaking contact between the bottom of the hook and your hand and/or glove.
How to resolve insufficient conductivity during calibration of Infaco Power Tool, causing pruning shears not to start?
If you're experiencing insufficient conductivity during the calibration of your Infaco Power Tool, and the pruning shears won't start, consider these steps: * Ensure you are wearing an INFACO conductive glove to enhance conductivity. * The glove may be damaged; consider replacing it. * Clean the glove by hand using clean water without detergent, and allow it to dry completely before recalibrating. * Repeat the calibration process twice, testing one glove at a time by removing one glove and then the other.
General| Battery Type | Lithium-Ion |
|---|---|
| Battery Voltage | 48V |
| Cutting Capacity | 40mm |
| Cutting Diameter | 40mm |
| Type | Electric Pruning Shear |
| Voltage | 48V |
Read safety warnings and follow environmental disposal rules.
Lists all items included in the pruning shears case.
Identifies key components of the pruning shears and their functions.
Details power, cutting capacity, weight, dimensions, and charger compatibility.
Instructions for charging the battery before first use.
Steps for attaching and wearing the battery holder belt and suspenders.
Guide on connecting, activating, and starting the shears.
Key safety rules, battery handling, and operating temperature guidelines.
How to use the half-opening switch for reduced blade opening.
Explains switching between proportional and pulse operating modes.
How to interpret the LED indicators for battery charge status.
Steps to put the pruning shears into standby mode for safe storage.
Explains automatic standby and power-off features after inactivity.
Procedure for turning off the pruning shears using the ON/OFF button.
Instructions for connecting the charger to power.
Steps for placing the battery on the charger and monitoring charge.
Guide on charging a second battery alongside the first.
Procedure to prepare batteries for long-term storage or winter.
Advice on recovering battery autonomy if sleep mode was not followed correctly.
Rules for storing batteries and chargers safely and correctly.
Troubleshooting temperature faults on charger channels.
Steps for handling batteries detected as defective by the charger.
Steps to enter the adjustment mode for custom settings.
How to set half-opening positions and blade crossing ratios.
Explains LED lights for normal operation and overload.
Indicates LED patterns for temporary shut down due to blocking or high temperature.
Describes LED indications for flat battery or device faults.
Guide on proper blade sharpening technique and frequency.
Instructions for correct lubrication of the shears, including unlocking the blade.
Procedure for checking and adjusting the blade's tightness.
Step-by-step guide for removing and fitting a new blade.
Advice on cleaning the cutting head and preventing disease spread.
Recommendation for annual servicing to ensure proper functioning.
Regulations and precautions for transporting the device and batteries.
Essential safety measures for using, storing, and handling the pruning shears.
Details the warranty period, coverage, exclusions, and service procedures.
Information on fixed-price servicing and extended warranty benefits.
Contact details for technical information and customer support.
Official statement confirming compliance with EU directives for the equipment.
Space for dealer to fill in serial number, customer details, and purchase date.
Form to be returned by the customer to activate the full warranty.
To Next Page
