Infasecure CS5413 - Accessories

Accessories
SEAT PROTECTOR
FULL LENGTH
(if tted)
The seat protector is designed to protect
your car’s seat.
STANDARD
Position the front ap with pockets, at the
front of the rear seat and position the mat
rearwards to obtain a at t.
FULL LENGTH
Position the front ap with pockets, at the
front of the rear seat and position the mat
rearwards to obtain a at t. (If required an
additional ap has been provided to tuck in
between the seat back & cushion)
Position the back section up the seat back
and use the plastic buckle & webbing strap
to attach around the vehicle seat headrest
(if the rear vehicle seat does not have a
headrest then the strap could be used to
attach around the child seats top tether
after you have installed the child seat).
Step 1:
Step 1:
Step 2:
STANDARD
Follow the instructions covering the use of accessories provided with this child
restraint or spare parts provided by InfaSecure for this restraint.
IMPORTANT
!
Use of unauthorised aftermarket accessories (i.e items not provided in this
box with the child restraint), can reduce the safety provided by the child
restraint and may cause injury or death.
19