Bring the shoulder straps of the harness over
the top of the seat and down and over the
child’s shoulders so that the loops on the end of
the harness shoulder straps are near the vehicle
lap belt.
The upper anchorage strap of the INFA Securé Safe Ride
The upper anchorage strap of the child seat must be
attached to the Metal Buckle (G) on the child harness
tether strap. Refer to Figures (17) & (19) on this page.
NOTE: Attachment point on Metal Buckle (G) can some-
times be partly obscured by the upper anchorage straps
of the harness. Tighten the upper anchorage strap on the
child seat. Use and tighten the child harness as shown in
the instructions supplied with the child harness.
To Next Page
Loading...
