Delta Treatment Systems • 9125 Comar Drive, Walker, LA 70785 • 1-800-219-9183 • www.deltatreatment.com
7
SAMPLE
SAMPLE PROCEDURES:
1. PRIOR TO TAKING SAMPLE HAVE
ECOPOD PLANT DISCHARGE
EFFLUENT FOR UP TO 4 MINUTES
BY FLUSHING TOILETS AND/OR
USE GARDEN HOSE TO FLUSH OUT
2. INSERT SAMPLE COLLECTING BOTTLE
SAMPLE PORT.
TO COLLECT ONLY EFFLUENT THAT
IS CASCADING OVER THE CASCADING
3. HANDLE, STORE, AND TRANSPORT
EDGE.
AND PROCEDURES PROVIDED BY THE
SAMPLES AS SPECIFIED BY POLICIES
TESTING LABORATORIES.
EFFLUENT SAMPLE PORT
AND VENT
4" LINE FROM DWELLING
PRETREATMENT-TANK REACTOR-TANK
ECOPOD REACTOR
TO DISCHARGE
POINT OR EFFLUENT
REDUCTION SYSTEM
BELOW
SEE DETAIL
CASCADING EDGE
4" INLINE CROSS
SAMPLE PORT
SAMPLE PORT
4" INLINE TEE
6" PVC RISER
W/THRD CAP
4" INLET
4" OUTLET
RUBBER SEAL
MIN 6"
PORT DEPTH
PIPE OFFSET TO
BE 1/2" THE
PIPE DIA.
MIN. 6" DEPTH
PORT
(If Applicable)
AND VENT AND VENT
Figure 1
To Next Page
Loading...
