What to do if my Infiniton DHM-W20L does not run?
If your Infiniton Dehumidifier isn't running, first, ensure the power plug is properly inserted into the socket. Also, check if the water tank is full or incorrectly positioned; if so, drain the tank and reinstall it correctly. Note that the unit will not run if the ambient temperature is lower than 5°C or higher than 32°C, as this is normal behavior.
Why is my Infiniton Dehumidifier not dehumidifying effectively?
If your Infiniton Dehumidifier isn't dehumidifying effectively, it could be due to low room temperature or humidity, which reduces the dehumidification ability. Also, check the air outlet and inlet for any blockages and clean them to ensure proper airflow.
Why is my Infiniton Dehumidifier making abnormal noises?
Abnormal noise during operation of your Infiniton Dehumidifier can be caused by several factors. First, ensure the dehumidifier is placed on a smooth, stable surface. Check the air strainer and clean it if it's blocked. A “tittering” sound is normal and is just the sound of the refrigerant flowing.
What to do if my Infiniton DHM-W20L Dehumidifier is leaking water?
If your Infiniton Dehumidifier is leaking water, check the drainage pipe connection and fasten it if it's loose. Also, inspect the drainage system for any blockages and remove any obstacles. Straighten out the water pipe to ensure proper drainage.
How to fix an Infiniton DHM-W20L Dehumidifier that is not blowing out air?
If your Infiniton Dehumidifier isn't blowing out air, the air strainer might be blocked. Clean the air strainer.
Why is there frosting on my Infiniton Dehumidifier?
Frosting on your Infiniton Dehumidifier is normal when the ambient temperature is low, and the unit is in the process of automatic defrosting.
General| Dehumidifying capacity | 20 liters/day |
|---|---|
| Water tank capacity | 3.5L |
| Refrigerant | R290 |
| Operating Temperature Range | 5-35°C |
| Air Flow | 180 m³/h |
To Next Page
