Installation Instructions
Please Read the Manual Carefully Before Installation
Please note
Electricalconnection
The oven is fitted with a plug which plugs into an earthed socket.
The plug must not be earthed. The socket must only be prohibited on the
installed connection cable.
The plug must be replaced by a qualified electrician in accordance with the
applicable regulations.
If the plug no longer has access to the socket, there must be an all-pole
isolating switch in the installation.
There must be a separation of at least 3 mm on each side.
The installed cabinet must not be in contact with the appliance.
A clearance must be maintained between the wall and the base of the top
appliance. The specific size of the clearance can be found in the diagrams.
Minimum installation height: 85 cm.
Do not cover the ventilation
Note:
Do not trap or bend the power cable.
Screw A
Screw B
Mounting Plate
Trim-kit plastic cover
Footpad Block
Bracket
Rubber Pad
To Next Page
Loading...
