To Next PageTo Next Page
Need help?Do you have a question about the Infinity 6100M and is the answer not in the manual?
Audio Specifications| power output | 125W x 2 ch. |
|---|---|
| frequency response | 10Hz – 40kHz |
| signal-to-noise ratio | 91dB |
| line-level input sensitivity | 250mV – 6V |
| speaker-level input sensitivity | 6V – 16V |
| min. speaker impedance | 4 ohms, stereo |
Dimensions| speakers dimensions | 11" x 18" x 14-1/2" |
|---|---|
| amplifier dimensions | 8-1/8" x 8" x 2-3/8" |
| microphone dimensions | 1-1/4" x 2-1/2" x 3-5/8" |
Audio Specifications| power handling | 150W |
|---|---|
| peak power handling | 450W |
| sensitivity | 93dB @ 2.83V |
| frequency response | 80Hz – 20kHz |
| impedance | 4 ohms |
Physical Characteristics| cone material | Polypropylene |
|---|---|
| basket material | Cast-Polymer |
| tweeter type | CMMD[™] |
| surrounds material | Rubber |
| uv resistance | Yes |
| water resistance | Yes |
| salt-spray resistance | Yes |
Dimensions| dimensions | 11" x 18" x 14-1/2" |
|---|
Audio Specifications| power output at 4 ohms | 125W x 2 ch. |
|---|---|
| power output at 2 ohms | 150W x 2 ch. |
| bridged power output at 4 ohms | 250W x 1 ch. |
| frequency response | 10Hz – 40kHz |
| signal-to-noise ratio | 91dB |
| line-level input sensitivity | 250mV – 6V |
| speaker-level input sensitivity | 6V – 16V |
| min. speaker impedance | 2 ohms, stereo 4 ohms, bridged |
Dimensions| dimensions | 8-1/8" x 8" x 2-3/8" |
|---|
Safety advice and warnings for Infinity marine audio products, including hearing protection.
Summary of the 6000m speakers, 6100m system, and 2100m amplifier.
Guidelines for cleaning speakers and protecting amplifiers from water and moisture damage.
Detailed steps for attaching 6000m speakers to boat tower tubes.
Procedure for mounting 6000m speakers on flat boat surfaces.
Adjusting speaker orientation and connecting speaker wires to the amplifier.
Proper placement of amplifiers and secure connection of power supply wires.
Connecting source units and speakers to the amplifier for audio.
Adjusting gain and using the Page Ext switch for optimal performance.
Steps for installing the microphone connector plate and holder.
How to use the microphone's controls and features for the paging system.
Resolving common problems like no audio, distortion, or feedback.
Technical details for 6100m, 6000m, and 2100m components.
