Infinity ENTRA SUB TWO - Exploded View;Service Access

Entra Two Subwoofer
¤
Cabinet
(Not for sale)
Amplifier
(Not for sale)
2
7
4
6
10
9
5
3
8
4X
4X
6X
6X
6X
8
10X
Entra Sub Two
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
120V
60Hz
CROSSOVER
FREQUENCY
LEVEL
LINE LEVEL IN
PHASE
Min
Max
L
R
L R
For LFE use L or R
LFE NORMAL
HIGH
LEVEL
IN
L
R
HIGH
LEVEL
OUT
+ –
50Hz
0º 180º
150Hz
POWER
ON OFF
REMOVE THESE TWO SCREWS
TO REMOVE REAR COVER
AND ACCESS AMPLIFIER
LONGER SCREW HERE
TO SERVICE THE ENTRA SUB TWO
1) Remove the grille.
2) Extract (6) rubber grille retainers as shown in the illustration
above; this can be accomplished by carefully pulling them out of
the cavities with long-nosed pliers or similar tool.
3) Remove the (6) Phillips screws that are now exposed.
4) Remove the front baffle.
5) Remove the (6) screws that secure the driver.
6) To service the amplifier, remove the (10) Phillips screws at the
rear of the enclosure, and pull the amplifier out of the back.
Remove the two Phillips screws as indicated in FIGURE A to
remove the rear cover.
Figure A