1 Take out the box which contains the shoulder parts first, then take the main chair body out
of the carton box. To do this, have 2 or more people grasp the left and right metal seat frame
and lift it out slowly. Note: Put the remote controller on the seat surface when taking out the
main chair body to avoid damaging the controller.
2 Take out the head pad, back seat cushion, remote control holder, power cord, left and right
seat airbags, and the left and right shoulder massage devices from the shoulder box, grasping
two sides of the shoulder device and taking them slowly out. Put them on a table or on the
ground. (be careful not to scratch them).
3 Take out the left and right armrest from
the armrest box. Grab two sides of the
armrest and take them slowly from the
box. Note: Armrest is place upside down
inside the box. Put the armrest on a table
or on the ground. Be careful to not scratch
the armrests.
4 Take the legrest device out of the legrest carton box catching the front and
back two sides of the legrest and remove it from the box.
To Next Page
Loading...
