Infinity IT- 8000 Series User Manual

A. Attaching the Armrests
A1. Remove the main body of the massage chair from its packaging.
Locate the two armrests and remove all plastic covering.
A2. Locate the three holes (circled in red in the picture) at the base of the left armrest, attached to
the chair.
---------------------------------------------------------------------------------------------------------------------------------------------
MASSAGE CHAIR ASSEMBLY
USJ-9000
Main body
Armrest
* Although there is a hole, please
disregard the one circled in black.
A3. Look in the carton to locate the three identical screws depicted here:
A4. Fit the three screws mentioned in step A3 into the three holes mentioned in step A2.
(top view) (inverse view) (side view)
IT- 8000 Series Installation Guide

Infinity IT- 8000 Series Specifications

General

Brand	Infinity
Model	IT- 8000 Series
Category	Massager
Language	English

Summary

Massage Chair Assembly

Attaching the Armrests

Steps to attach armrests: locate holes, use screws, align bolts, connect air connectors, and confirm assembly.

Assembling the Legrest

Legrest Installation

Position legrest, insert cable and air hose, then fasten with screws to the chair body.

Connecting the Speakers

Speaker Setup

Locate connection slots, connect speaker wiring, fasten securely, and attach plastic covers.