---------------------------------------------------------------------------------------------------------------------------------------------
==
USJ-9000
A5. Locate the three bolts already partially inserted along the top of the left armrest.
A6. Align these three bolts to the three holes on the base of the left armrest.
Tighten these screws, working from the back first, then progressing up to the front.
A7. Align the two air connectors on the bottom of the left armrest to their corresponding slots
on the left side of the chair. Insert, then be sure to push the excess air hose slack
A8. Check to confirm that the armrests are well-assembled. Then rotate the screw 90º
clock-wise.
into the base. This is CRITICAL
to prevent air line kinking and
the chairs proper function.
To Next Page
Loading...
