Don’t use under sunlight or near any
heat source to avoid damaging
the upholstery.
Please use chair on a flat surface to
avoid unexpected noises or damage
to the chair.
1 Clean dust from plug and cord (using
a dry cloth).
2 Check there is no damage to cord
anywhere.
At least 4 inches from the wall.
At least 12 inches from the legrest.
Bind the cables and put them in the seat
to avoid damage when moving.
Do not drop the chair, you may damage
the electronics inside the chair.
Don’t use the castor wheels if the floor is
wooden or easily scratched. You will need
2 or more people to lift the chair in this
case.
Make sure the power is off on the chair
and that the plug unplugged and not
dragging behind the chair.
Please make sure the
massage unit is in the
head area before sitting
on the chair.
To avoid injury caused
by wrong position of
massage unit.
Back scan will not be effective if the
massage unit can’t detect position of
your shoulders and head.
Because the chair is heavy, it can
cause damage to flooring. Please
put a blanket or carpet
piece under the
chair to protect
the floor.
To Next Page
Loading...
